Quick Bluing Solution (250 mL) - Brush and Immersion Application - Gun Bluing

Product Information

Once you’ve cleaned the blade, you’ll need to apply your bluing solution with a cotton ball, then wipe the metal dry with a soft cloth, and polish the metal with fine-grit sandpaper. To dip your gun parts in a hot bluing solution, you will need some soft wire – about 20 inches long.

A. I am the gunsmith for a company in my hometown and black approximately 60 to 80 sets of barrels and/or rifles annually.If you discharge without an authorisation, permit or consent from your environmental regulator you could be prosecuted and fined or imprisoned. Blacksmith products to this day may occasionally be found made from blued steel by traditional craftsmen in cultures and segments of society who use that technology either by necessity or choice. Different forms of bluing have been used by gunsmiths and gun enthusiasts for centuries now to protect guns from wear and damage, but you might still be wondering what gun bluing is.

You can be fined if you do not comply with an abatement notice, and your local authority can take steps to stop the nuisance and charge you for its costs.Mark Lee makes the process fairly easy, yet it is still time consuming, requires the right tools, and patience. The higher temperatures of the other processes as well as their caustic nature could weaken the soldered joints and make the gun hazardous to use.

With 16 years of experience working for Commercial Metals Company, Christopher specializes in designing modern infrastructure, metal recycling, fabrication, performance steel, and construction services.Catching” the right texture and shade of original charcoal bluing finish depends mostly on the underlying metal polish.

Train and regularly audit your staff to ensure that they consistently use the appropriate procedure. Rusting times differ according to where you are in the world and the temperatures and relative humidity levels there, test and test again.Bluing can also be done in a furnace, for example for a sword or other item traditionally made by a blacksmith or specialist such as a weapon-smith. The process involves packing the steel in charcoal and "baking" it at approximately 800° for few hours. FINISHED RESULTS PRODUCED A FINISH THAT LOOKS LIKE ANY HIGH QUALITY OR HIGH END BROWNING ON THE MARKET. When you are ready to reblue your gun, the first thing to do is unload and disassemble your firearm. I have since read that some of the old rust bluing formulas contained cyanide which have since been discontinued for obvious safety reasons.