Connect the USB upstream cable (shipped with your monitor) to an appropriate USB 3.0 port on your computer. The maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC.

A few permanently bright or dark resolutions are considered normal by industry standards. The exact number of resolutions that are allowed varies depending on the monitor. See Dell Monitor Quality and Pixel Policy for more details. When the monitor is connected to a personal computer using HDMI and PBP mode is turned off, the monitor may display images at the lower resolution (2560 x 1440) rather than automatically switching to the native resolution (5120 x 1440).Information about the average amount of time, in which the pixels change from one color to another. Monitor will not support the YCbCr color format when a USB Type-C to HDMI dongle is connected from the monitor to the personal computer.

The storage temperature shows the range from a minimum to a maximum temperature, within which storing of the display is considered to be safe. Single USB Type-C to supply power (PD 65 W) to a compatible laptop while receiving video and data signal. Note: The Dell P2722H monitor is heavy; handle with extreme care. It is recommended to have two people to lift or move this monitor. Some combinations of USB Type-C to HDMI dongle and video or graphics card (GPU) are not compatible to support the YCbCr color format. Approximate height of the display. If the manufacturer does not provide such information, the height is calculated from the diagonal and the aspect ratio.Intel SME Study Disclaimer: Based on a 2018 survey of small business owners in five countries. Details here intel.com.au/smestudy Due to legacy platform cannot recognize or output 5120 x 1440, we suggest changing EDID to lower resolution to cover this compatibility problem. Disable the YCbCr setting from the video or graphics card (GPU) utility like Intel HD Graphics Control Panel.

When you notice screen abnormalities like distortion, clarity, horizontal or vertical lines, color fade, it is always a good practice to isolate the monitor by running the onboard Diagnostics. Information about whether the stand can be dismounted. Usually, this is required for wall mounting.

The display mode on your personal computer reverts to "Duplicate" or "Extend,." This dependson which was selected before you changed to "Second screen only" or "Projector only" when you close and open the laptop screen. Ergonomics Information about the ergonomic functions - height adjustment, swivel angles, tilt angles, etc. VESA mount

Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality. Extensive connectivity: Easily connect to a variety of devices with extensive connectivity ports, including HDMI, DisplayPort, DisplayPort (Out), USB-C, RJ45 and 4x SuperSpeed USB 5Gbps. The operating humidity shows the acceptable level of humidity, in which the display will function flawlessly. It sets a lower and an upper humidity level for safe operation and is measured in percentage. USB ports on the monitor do not work when the monitor is connected to a personal computer using USB Type-C.The energy efficiency class/label provides general idea about the power consumption. There are different energy efficiency classes and each sets its own requirements regarding the power consumption. Some of the existent energy efficiency classes are A+++, A++, A+, A, B, C, D, E, F, G. Approximate width of the display. If the manufacturer does not provide such information, the width is calculated from the diagonal and the aspect ratio. This section provides information about troubleshooting steps that can help resolve the most common issues with the Dell P2722HE monitor. Alternatively, to learn more about troubleshooting common issues on Dell monitors, refer to the Dell knowledge-base article Troubleshooting Display or Video Issues on a Dell Monitor or use our Monitor self-help Guide. Common Problem